Honeywell PC42E-T
1. Turn off the printer and wait 30 seconds
2. Press in on the Cover Latches on both sides of the printer and open the Printer Cover
3. Press in on the top of both Locking Tabs to open the Print and Ribbon Mechanism
4. Turn the printer back on, the Status LED will blink once, will go solid, and then continue blinking
5. Press and hold the ‘Feed / Pause’ button on the first, green blink of the Status LED, Continue to hold the ‘Feed / Pause’ button until the Status LED turns off, then release
7. Make sure the labels are correctly loaded
8. Close the Printhead & Printer Cover
10. Wait 30 seconds for the Factory reset to complete
11. Turn off the printer and wait another 30 seconds
12. Turn the printer back on and let it continue to turn on normally